8 x 80lb 840cc fit Deka Compact Fuel Injectors FI114700 875cc EV1 High Impedance
von KSM Motorsports
Herstellerteilenummer: FI114700
Ursprünglicher Preis
$261.00
-
Ursprünglicher Preis
$261.00
Ursprünglicher Preis
$261.00
$261.00
-
$261.00
Aktueller Preis
$261.00
8 x 80lb 840cc fit Deka Compact Fuel Injectors FI114700 875cc EV1 High Impedance
Details:
- Manufacturer Part Number: FI114700, A2C32624700
- Compatible part numbers: 114700
- Manufactured with precision to meet OE standards; Easy installation
- The fuel injector has been 100% tested and exactly match the internal coil resistance and fuel flow rate of OEM fuel injector
- Flow rate @ 43.5 psi/3 bar: 80 lb/hr / 840cc/min
- Static Flow Rate: 875cc /min
- Quantity: 8 pieces
- Condition: New
- Compact size fuel injector
- Electrical connector type: EV1 (Minitimer, Jetronic)
- 8 hole nozzle
- O-Ring Type: Viton
- E85 Compatible: Yes
- Series: Fit DEKA 5 ( DEKA V )
- Offset: 0.065ms
- Turn on time @ 14VDC: 1.3ms
- Turn off time: 0.7ms @ 600KPa
- Increased fuel economy and Throttle response / Smoother Idle
- Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
- Low Impedance performance characteristics with High Impedance Compatibility
- Pressure/Leak tested, Spray/Flow Tested
Fitment details:
- Overall Length: 48 mm
- Oring to Oring Length: 34,5 mm
- Diameter: 16 mm
- Orings: Top and bottom 14,5 mm
Application/Compatibility:
- Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.
- These injectors are able to function at high fuel pressures and donât exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.
- They are based on the same design as the popular FI114992 80 lb/hr DEKA IV ( DEKA 4 ) injector. The EV1 injector connector can be found on many older and late-model OEM applications such as the GM TBI, TPI, LT1, LT4, LS1, some LS2, some LS6 and most European applications.