4 x 80lb 840cc fit Siemens Deka FI114991 High Impedance (Long Style) EV6 / USCAR
Manufacturer part number:
Prezzo originale
$144.00
-
Prezzo originale
$144.00
Prezzo originale
$144.00
$144.00
-
$144.00
Prezzo attuale
$144.00
4 x 80lb 840cc fit Siemens Deka FI114991 High Impedance (Long Style) EV6 / USCAR
Details:
- Manufacturer Part Number: FI114700
- Compatible part numbers: 109-991, 109991
- Quantity: 4 pieces
- Condition: New
- Manufactured with precision to meet OE standards; Easy installation
- The fuel injector has been 100% tested and exactly match the internal coil resistance and fuel flow rate of OEM fuel injector
- Pressure/Leak tested, Spray/Flow Tested
- Flow rate @ 43.5 psi/3 bar: 80 lb/hr / 840cc/min
- Static Flow Rate: 875cc/min
- Dynamic Flow Rate : 18.6 mg/pulse 2.5ms PW, 20 ms Period
- Fit Deka EV6 fuel injector - Long size
- Single hole nozzle
- Electrical Connector: USCAR or EV6
- Series: fit DEKA 4 ( DEKA IV )
- Offset: 0.065ms
- Turn on time @ 14VDC: 1.3ms
- Turn off time: 0.7ms @ 600KPa
- Voltage: 8-15 Volts, nominal 13.5 Volts
- O-Ring Type: Viton
- Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
- Low Impedance performance characteristics with High Impedance Compatibility
- E85 Compatible: Yes
Fitment details:
- Overall Length: 74mm
- Oring to Oring Length: 63 mm
- Diameter: 16 mm
- Orings: Top and bottom 14,5 mm
Application/Compatibility:
These injectors flow 80 lbs/hr at 43.5 PSI ( 3 BAR ) and even more at greater PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.
These injectors are able to function at high fuel pressures and donât exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.
This injector is based on the same design as the popular FI114961 60 lb/hr DEKA IV ( DEKA 4 ) injector. The EV6 / USCAR injector connector can be found on many late-model GM (LS2, LS3, LS7), Dodge (Hemi), Ford (Modular) and select import motors. We also offer the same injector with the EV1 connector. Buy only the injector with the connector you need and eliminate the need for in-line adapters or having to change the factory connectors!