4 x 60lb 630cc fit Deka Fuel Injectors FI114191 108191 EV6/USCAR High Impedance
por KSM Motorsports
Manufacturer part number: FI114191
Precio original
$153.00
-
Precio original
$153.00
Precio original
$153.00
$153.00
-
$153.00
Precio actual
$153.00
4 x 60lb 630cc fit Deka Fuel Injectors FI114191 108191 EV6/USCAR High Impedance
Details:
- Manufacturer Part Number: FI114191 / 108-191 (108191)
- Manufactured with precision to meet OE standards; Easy installation
- The fuel injector has been 100% tested and exactly match the internal coil resistance and fuel flow rate of OEM fuel injector
- Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min
- Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min
- Quantity: 4 pieces
- Condition: New
- 4-hole nozzle
- Long size fuel injector
- Connector: EV6 USCAR
- Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
- Gain: 0.11ms/mg
- Offset: 0.055ms
- Turn on time @ 14VDC: 1.14ms
- Turn off time: 0.85ms @ 600KPa
- Series: fit DEKA 4 ( DEKA IV )
- Orifice Type: Multi-orifice
- Spray Pattern: 30 Degree Spray Cone
- Factory fitted with Viton upper and lower o-rings
- Low Impedance performance characteristics with High Impedance Compatibility
- Overall Length: 74 mm
- Oring to Oring Length: 60 mm
- Diameter: 16 mm
- Orings: Top and bottom 14,5 mm
Dimensions, other than the connector, are identical to the FI114961 EV1 Siemens Deka IV Long Injector.
Application/Compatibility:
- Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.
- These injectors are able to function at high fuel pressures and donât exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.
- The EV6 / USCAR injector connector can be found on many late-model GM (LS2, LS3, LS7), Dodge (Hemi), Ford (Modular) and select import motors.
- These are the correct injectors for all 60mm applications.