1 x Fuel Injector 124lb 1300cc High Impedance Long Style FI114961 EV1 plug 60mm
por KSM Motorsports
Manufacturer part number: KSM-60MMLONG-1300CC-EV1
Precio original
$0.00
-
Precio original
$0.00
Precio original
$0.00
$95.00
$95.00
-
$95.00
Precio actual
$95.00
1 x Fuel Injector 124lb 1300cc High Impedance (Long Style) FI114961 EV1 plug (60mm)
Features:
- Condition: New
- Quantity: 1 x Fuel Injector
- Cross Reference Part Numbers: FI114961, 107961, 107-961, L107, INJ-GAS-006
- Part number: KSM-60MMLONG-1300CC-EV1
- Excellent response characteristics
- Robust Design
- High Impedance
- Low Impedance performance characteristics with High Impedance Compatibility
- Standard Long Length 60mm o-ring to o-ring
- 1 Year Warranty
- Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
- Customized Flow Rate at 43.5 PSI / 3 bar: 1300 cc/min, ≈123.8 lb/hr
- Gain: 0.11ms/mg
- Offset: 0.055ms
- Turn on time @ 14VDC: 1.14ms
- Turn off time: 0.85ms @ 600KPa
- Connector: EV1 (Jetronic / Minitimer)
- Series: Compatible with DEKA 4 ( DEKA IV )
- Single hole nozzle
- Factory fitted with Viton upper and lower o-rings
- Compatible Fuels: Pump Fuels 95/98, Race Fuels, Alcohols, All known Ethanol Blends including E85
Dimensions:
- Overall length: 3 inches, 74 mm
- O-ring to o-ring: 2.3 inches, 60 mm
- Body Diameter: 16 mm
- O-rings: Top and bottom, 14.5 mm
Application:
- Universal Compatibility: Equipped with the standard EV1 (Jetronic) connector and the standard "Long" (60mm O-ring to O-ring) body style.
- Direct fit for many street and racing applications such as Ford, GM, Chrysler, Buick, Mitsubishi, Ford, BMW, Audi, VW, etc.
- Fitments: Domestic U.S. CAR and some imports with EV1 electrical connection.
Note: Please leave a note at checkout if you require free EV1 / Jetronic connector with pigtail to be included with your order.
These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.
The EV1 injector connector can be found on many older and late-model OEM applications such as the GM TBI, TPI, LT1, LT4, LS1, some LS2, some LS6 and most European applications. We also offer the same injector with the EV6 / USCAR connector as Part Number KSM-60MMLONG-1300CC-USCAR. Buy only the injector with the connector you need and eliminate the need for in-line adapters or having to change the factory connectors!