1 x 71lb 750cc Fuel Injector (Long Style) FI114191 60mm EV6/USCAR connector E85

1 x 71lb 750cc Fuel Injector (Long Style) FI114191 60mm EV6/USCAR connector E85

Details:

• Quantity: 1 piece
• Customized Flow Rate at 43.5 PSI / 3 bar: 750 cc/min, ≈71 lb/hr 
• Manufacturer Part Number: KSM-60MMLONG-750CC-USCAR
• Reference Part Numbers: FI114191 / 108-191 (108191)
• Manufactured with precision to meet quality standards; Easy installation
• Condition: New
• 4-hole nozzle

• Body Style: Long Body Fuel Injector
• Connector: USCAR / EV6 
• Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
• Gain: 0.11ms/mg
• Offset: 0.055ms
• Turn on time @ 14VDC: 1.14ms
• Turn off time: 0.85ms @ 600KPa
• Series: fit DEKA 4 ( DEKA IV )
• Orifice Type: Multi-orifice
• Spray Pattern: 30 Degree Spray Cone
• Robust design
• 1 year warranty
• Factory fitted with Viton upper and lower o-rings
• Low Impedance performance characteristics with High Impedance Compatibility
• Compatible Fuels: Pump Fuels 95/98, Race Fuels, Alcohols, All known Ethanol Blends including E85

• Overall Length: 74 mm
• O-ring to O-ring Length: 60 mm
• Body diameter: 16 mm
• O-rings diameter: Top and bottom 14,5 mm

• Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.
• These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.
• The EV6 / USCAR injector connector can be found on many late-model GM (LS2, LS3, LS7), Dodge (Hemi), Ford (Modular) and select import motors. 
• These are the correct injectors for all 60mm applications.